Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation

Search Page

Filters

My NCBI Filters

Results by year

Table representation of search results timeline featuring number of search results per year.

Year Number of Results
1990 1
1998 1
1999 1
2003 2
2005 6
2006 7
2007 15
2008 16
2009 19
2010 13
2011 11
2012 9
2013 9
2014 11
2015 18
2016 4
2017 4
2018 11
2019 11
2020 9
2021 10
2022 10
2023 7
2024 2

Text availability

Article attribute

Article type

Publication date

Search Results

177 results

Results by year

Filters applied: . Clear all
The following term was not found in PubMed: nCAGD
Page 1
Surface tension-assisted additive manufacturing.
Ragelle H, Tibbitt MW, Wu SY, Castillo MA, Cheng GZ, Gangadharan SP, Anderson DG, Cima MJ, Langer R. Ragelle H, et al. Nat Commun. 2018 Mar 22;9(1):1184. doi: 10.1038/s41467-018-03391-w. Nat Commun. 2018. PMID: 29567939 Free PMC article.
The proliferation of computer-aided design and additive manufacturing enables on-demand fabrication of complex, three-dimensional structures. ...The operating parameters for the process are determined using a physical model, and complex geometric structures a …
The proliferation of computer-aided design and additive manufacturing enables on-demand fabrication of complex, three-d …
Virtual-pinhole PET.
Tai YC, Wu H, Pal D, O'Sullivan JA. Tai YC, et al. J Nucl Med. 2008 Mar;49(3):471-9. doi: 10.2967/jnumed.107.043034. Epub 2008 Feb 20. J Nucl Med. 2008. PMID: 18287272 Free PMC article.
We proposed and tested a novel geometry for PET system design analogous to pinhole SPECT called the virtual-pinhole PET (VP-PET) geometry to determine whether it could provide high-resolution images. ...Small line sources were detected if the activity concent …
We proposed and tested a novel geometry for PET system design analogous to pinhole SPECT called the virtual-pinhole PET (VP-PE …
Computer-aided optimal design of custom scoliosis braces considering clinical and patient evaluations.
Visser D, Xue D, Ronsky JL, Harder J, Zernicke RF. Visser D, et al. Comput Methods Programs Biomed. 2012 Sep;107(3):478-89. doi: 10.1016/j.cmpb.2010.12.017. Epub 2011 Jan 22. Comput Methods Programs Biomed. 2012. PMID: 21257222
In this approach, torso geometry of the scoliosis patient was achieved using a 3-D imaging system that generated a 3-D torso surface model, which was modified using a custom CAD system to design the 3-D brace surface model. Two design parameters, a translatio …
In this approach, torso geometry of the scoliosis patient was achieved using a 3-D imaging system that generated a 3-D torso surface …
Role of surgeon intuition and computer-aided design in Fontan optimization: A computational fluid dynamics simulation study.
Loke YH, Kim B, Mass P, Opfermann JD, Hibino N, Krieger A, Olivieri L. Loke YH, et al. J Thorac Cardiovasc Surg. 2020 Jul;160(1):203-212.e2. doi: 10.1016/j.jtcvs.2019.12.068. Epub 2020 Jan 8. J Thorac Cardiovasc Surg. 2020. PMID: 32057454 Free PMC article.
OBJECTIVE: Customized Fontan designs, generated by computer-aided design (CAD) and optimized by computational fluid dynamics simulations, can lead to novel, patient-specific Fontan conduits unconstrained by off-the-shelf grafts. ...In this study, we as …
OBJECTIVE: Customized Fontan designs, generated by computer-aided design (CAD) and optimized by computational fl …
Survival of ceramic computer-aided design/manufacturing crowns bonded to preparations with reduced macroretention geometry.
Bindl A, Richter B, Mörmann WH. Bindl A, et al. Int J Prosthodont. 2005 May-Jun;18(3):219-24. Int J Prosthodont. 2005. PMID: 15945309
This study investigated the survival and clinical rating of monolithic computer-aided design/manufacturing (CAD/CAM) ceramic crowns bonded to preparations with reduced macroretention, hypothesizing that adhesion would compensate for reduced retention geome …
This study investigated the survival and clinical rating of monolithic computer-aided design/manufacturing (CAD/CAM) ce …
Current advancements in bio-ink technology for cartilage and bone tissue engineering.
Badhe RV, Chatterjee A, Bijukumar D, Mathew MT. Badhe RV, et al. Bone. 2023 Jun;171:116746. doi: 10.1016/j.bone.2023.116746. Epub 2023 Mar 23. Bone. 2023. PMID: 36965655 Review.
In tissue engineering, the fate of a particular organ/tissue regeneration and repair mainly depends on three pillars - 3D architecture, cells used, and stimulus provided. 3D cell supportive structure development is one of the crucial pillars necessary for defining organ/tissue …
In tissue engineering, the fate of a particular organ/tissue regeneration and repair mainly depends on three pillars - 3D architecture, cell …
The Recent Revolution in the Design and Manufacture of Cranial Implants: Modern Advancements and Future Directions.
Bonda DJ, Manjila S, Selman WR, Dean D. Bonda DJ, et al. Neurosurgery. 2015 Nov;77(5):814-24; discussion 824. doi: 10.1227/NEU.0000000000000899. Neurosurgery. 2015. PMID: 26171578 Free PMC article. Review.
Until recently, when a patient's own cranial flap was unavailable, these goals were unattainable. Recent advances in implant computer-aided design and 3-dimensional (3-D) printing are leveraging other advances in regenerative medicine. ...Furthermore, an inte …
Until recently, when a patient's own cranial flap was unavailable, these goals were unattainable. Recent advances in implant computer …
On the Thermal Models for Resistive Random Access Memory Circuit Simulation.
Roldán JB, González-Cordero G, Picos R, Miranda E, Palumbo F, Jiménez-Molinos F, Moreno E, Maldonado D, Baldomá SB, Moner Al Chawa M, de Benito C, Stavrinides SG, Suñé J, Chua LO. Roldán JB, et al. Nanomaterials (Basel). 2021 May 11;11(5):1261. doi: 10.3390/nano11051261. Nanomaterials (Basel). 2021. PMID: 34065014 Free PMC article. Review.
For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer-aided design, both at the device and circuit levels. Most of the different RRAM models presented so far in the literature …
For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer …
[Three-dimensional finite element analysis of one-piece computer aided design and computer aided manufacture involved zirconia post and core].
Zhou TF, Zhang XH, Wang XZ. Zhou TF, et al. Beijing Da Xue Xue Bao Yi Xue Ban. 2015 Feb 18;47(1):78-84. Beijing Da Xue Xue Bao Yi Xue Ban. 2015. PMID: 25686334 Free article. Chinese.
OBJECTIVE: To analyze the biomechanics trait of one-piece computer aided design and computer aided manufacture (CAD/CAM) zirconia post and core by the Three-dimensional finite element. ...The maximum Von-Mises stress value of the tooth root, pos …
OBJECTIVE: To analyze the biomechanics trait of one-piece computer aided design and computer aided manufa …
Topology optimization of a mandibular reconstruction plate and biomechanical validation.
Koper DC, Leung CAW, Smeets LCP, Laeven PFJ, Tuijthof GJM, Kessler PAWH. Koper DC, et al. J Mech Behav Biomed Mater. 2021 Jan;113:104157. doi: 10.1016/j.jmbbm.2020.104157. Epub 2020 Oct 28. J Mech Behav Biomed Mater. 2021. PMID: 33187871 Free article.
The objective of this study was biomechanical validation of a TO-PSI. METHODS: A computer-aided design (CAD) model with a segmental defect was created based on the geometry of a polyurethane mandible model. A standard-PSI was designed to bridge …
The objective of this study was biomechanical validation of a TO-PSI. METHODS: A computer-aided design (CAD) model with …
177 results